This was posted on Total Protection Interactive, and archiving it so that it wouldn't disappear into the internet void was mentioned. In keeping, and to further spread the tactical good news, I'm posting it here. The original source is, apparently, the NYPD.
Although it is valuable for the original purpose of fostering awareness, I see this as more of a “things not to do” list than things to watch out for. There are more “tells” than are listed here that I've seen people (good guys) with concealed weapons fall victim too – If you pay attention to what you're doing, you'll probably be aware of them and be able to avoid them.
If you think the bad-guys are unaware of these tells, and aren't watching for them, you're wrong. Maybe dead wrong.
Wednesday, December 23, 2009
Friday, December 18, 2009
Movement and Overcoming Resistance
A forum for which I moderate was having a discussion of auxiliary “dynamic” skillsets, those things that while often overlooked in the rush to the guns, knives and MMA, are no less important. I mentioned that I felt the ability to move, fluidly and undeterred through an environment on foot was essential. Someone asked for clarification, and framed his question by asking what I would put together for a class on that subject. This article is an expanded version of that answer. I've retained the structure of an expanded course layout, as it makes an effective device for framing these skills so the autodidact/independent student can create their own course.
Flight from pursuit. The phrase conjures images of bad-guys running from the cops, spy's running from spy hunters, a soldier running from a prisoner camp, or you running away from a pursuing criminal. For many, that last example will have brought their mental streams to a crashing halt; “Running away? No, man, just, no... I'm beating him to a pulp.” Well, whatever. Really. I'm a big fan of, as the great philosopher Snoopy once said, running away to run away again another day. I don't like fighting. Good at it? Better than I was yesterday. Like doing it for keeps? No. There are times to stand and times to run.
Now, of course, there is more to this type of movement than running away, but that is the most obvious, and immediate, need for such skillsets among everyday folks. There are other reasons, not the least of them being capability for capabilities sake, but if you're looking for reasons or justification? There it is. Call it “escape and evasion” if it makes you feel better.
(And if it doesn't, don't make the jump...)
Flight from pursuit. The phrase conjures images of bad-guys running from the cops, spy's running from spy hunters, a soldier running from a prisoner camp, or you running away from a pursuing criminal. For many, that last example will have brought their mental streams to a crashing halt; “Running away? No, man, just, no... I'm beating him to a pulp.” Well, whatever. Really. I'm a big fan of, as the great philosopher Snoopy once said, running away to run away again another day. I don't like fighting. Good at it? Better than I was yesterday. Like doing it for keeps? No. There are times to stand and times to run.
Now, of course, there is more to this type of movement than running away, but that is the most obvious, and immediate, need for such skillsets among everyday folks. There are other reasons, not the least of them being capability for capabilities sake, but if you're looking for reasons or justification? There it is. Call it “escape and evasion” if it makes you feel better.
(And if it doesn't, don't make the jump...)
Monday, December 14, 2009
Realistic Resiliency
“Solutions for Austerity and Hostility” - That's what it says at the top of the page. But what does that really mean? Primarily we are interested in, and focused on, situations of immediacy that require dynamic action - Wilderness survival, tactical medicine, fight skills, and the tools and use solutions, that benefit these efforts.
There is a great need for these tools and skillsets – Most people would benefit from taking ownership of some knowledge on wilderness survival, medicine, integrated combatives and general better livin' through not gettin' killed. Those who spend a great deal of time outdoors, live/work in the back country, are armed professionals or are otherwise engaged in dangerous work have even greater needs for wild-surv, medical, combative and related skills. This is, and will remain, the majority of what's discussed here.
But, is it enough to shoot, fight, survive and doctor in the immediate tactical or survival situation? Or should those skills be merely the dynamic end of a much stronger framework of capability and resilience? To the former, I say no, and to the latter, I say yes – Skills to serve the immediate need, should be supported by a capable lifestyle and a resilient one.
Labels:
Knowledge,
Mindset,
Outside The Box,
Prepping,
Resilience,
Survival
Sunday, December 6, 2009
The Brave Enemy
I try to avoid rants and random thought-dump type posts preferring to focus on substantial content growing out of actual work and sweat. Typically I like to leave the mental gymnastics and thought pieces to others, but today I'm giving in to the voices. I've been doing a lot of thinking on violence and issues there of recently, particularly the psychology of predators (both criminal, and non). This is something in which I am intensely interested, and return to frequently. There are probably more posts coming in the future in this area, and particularly on getting inside the head of violent predators. Some recent conversations, news items, and discussions about violent confrontation, around the net brought these thoughts to the fore as a few points I wanted to make.
These are all original ideas, but most of them aren't my original ideas. This should be old hat for many, and I truly hope it is, but the points are valid and bear revisiting now, and often.
In the wake of recent violence I've repeatedly heard the actors responsible referred to as “cowards”. On one of the discussion forums linked at right a poster noted that “coward” was the wrong word, and he's right.
The enemy may have great courage. He may be willing to brave overwhelming odds in his effort to kill you. Look at the news about violence and you will see the usual skel-on-skel, killings and the family killings, but you'll also see something else, especially recently. You'll see where individuals with planning and violence of action faced overwhelming odds to do extreme harm, and succeeded. It takes courage, it takes resolve, to face odds that are against you, and win. It is not cowardly to face down a greater number of armed and armored opponents, and kill them. Surely, it takes a great deal of evil, but it takes courage too. It doesn't take honor, morality, or kindness, but courage certainly. Or madness, but if the result is the same, is there a difference? No.
Tuesday, October 27, 2009
Things To Ruin A Perfectly Good Day


One of the ongoing projects behind the scenes here is to catalog the range of explosives used in mining, particularly in the old days. Particularly the varieties of form, and what happens to them (chemically and in appearance) as they degrade. Eventually this catalog will be made available, to aid other “drifters” (abandoned mine explorers) and those who's work takes them to the depths.
I've just been adding some pictures to the Facebook page (which you should check out), and these are among them. I thought they might be of interest to the larger community, so I'm posting them here. Future photographs of this type will go on the FB page, so please, become a fan and keep up to date!!
We entered a short mine complex in the Magdalena district, and when we turned back after hitting the end of the tunnel found this. It was in the wall a few yards back the way we'd come, and just above our heads. Everyone else moved carefully out, and I took a few quick pictures and then similarly removed myself with delicate haste.
The fuse is an old type of safety fuse (blackpowder w/ fabric wrapper), and behind it the pretty blue colors are from corrosion on the blasting cap (likely a lead azide charge, in a copper sheath. Now, with exposure to moisture [this was a wet mine], the visible "corrosion" is likely to be extremely sensitive Copper Azide Salts). Further behind that is what can only be assumed to be an old, degraded, stick of dynamite.
Dangerous, scary, stuff - Old blasting caps and old dynamite are not your friends, and are extremely dangerous. It's one of those things we hope to never find, and treat with the utmost of respect by leaving the hell alone and avoiding totally. Realizing we've accidentally put ourselves in an environment with it is distinctly uncomfortable.
In this case, it would've been hard to avoid entirely, but better awareness of the environment would've prevented going beyond it and allowing it to be between us and the only way out.
Wednesday, October 21, 2009
CamelBak Delta-5 Hydration Vest Part Dos

At BFE Labs, we're doing things differently. We're taking some unconventional approaches in what we review, and how. By using different environments and uncommon purposes for some items, we can offer a greater contribution to the community knowledge pool than if we repeated the circumstances and settings of every other review written for any given product. Taking equipment, tools and techniques to the limit, across a range of circumstances, is the only way to truly prove them. This is one of the driving reasons why we've been evaluating load bearing equipment during extreme wilderness use, primarily during abandoned mine exploration.
These evaluations, beginning with the 5.11 Chest Rig, and continuing with James Mac's evaluation of the CamelBak Delta 5, are not the typical weekend on the gun-range evaluation that many readers are used to seeing in the popular tactical media. There is reason to this madness, and that reason is to provide a more complete picture of what these products can do, under a wider range of circumstance, than the typical evaluation.
We hope you find the same value in this approach that we do, and welcome your feedback!
Continuing this approach, we're pleased to bring you the second installment of James Mac's review of the CamelBak Delta-5 Tactical Hydration Vest.
James Mac is a technician at one of the premier weapons test facilities in the Western US, and brings a diversity of experience in engineering and the outdoors to the table.
CamelBak Delta-5 Hydration Vest Part 2:

After numerous trips into abandoned mines in the area, I remain pleased with how the CamelBak Delta 5 is holding up. I am impressed with this vest as a valuable option. It contains almost all of the bare-minimum gear that I want in just about any outdoors activity, be it hiking, camping, or subterranean exploration. What gear could not fit on the vest fits well in a thigh rig that I have setup as an addition to the vest. The Delta 5 holds enough water for a couple of hours of hiking or several hours of mine exploration. It also packs a blowout kit, a handgun, a pair of small binoculars, radio, compasses, MRE's, E-tool, boo-boo kit, and climbing hardware.

In the previous review “CamelBak Delta-5 Tactical Hydration Vest”, the layout and construction of the PALS webbing was praised. I would reiterate those praises. This quality of build allows the possibilities of gear attachment and placement to be just about endless. I continue to play with the layout of my vest, and plan to continue tweaking it until it is as good as it gets. This will probably mean having an adjustable layout for each activity, subterranean (with and without rope), hiking, camping, etc.

I've placed the items, (handgun, blow-out kit, binoculars, radio, compasses), that I might need at a moments notice up front where they are easily accessible. The items that would likely require removing the vest or having a buddy access were placed on the back of the vest (E-tool, boo-boo kit, MRE, climbing hardware).
The little touches that Camelbak included have proven themselves also. In particular the metal D-rings that are attached to the vest at the shoulders - I attached a carabiner to one of the D-rings to assist in cleaning rope, while going up a rickety ladder in a mine. It was nice to have my hands free while not worrying about the rope falling back down the hole. The belt attachment system is also nice, allowing the vest to stay firmly in place no matter what angle my torso is at, even when ending up crawling on hands and knees or sliding face first down inclines.
During rappelling the Delta 5 does not interfere with the rope or rappelling device. It provides ample room for use with a climbing harness (it gets a little crowded around the middle, but that seems unavoidable if rappelling with gear). I look forward to testing the vest further on rope, particularly during ascents.

The overall vest is holding up very well to all of my use/abuse. There are no busted stitches or threads, no rips in the material, and nothing has just fallen off [We've experienced all these issues with inferior gear in the mines. Ed.]. The construction of the vest is impressive. I have been very impressed with how the vest wears and handles the various situations I have thus far thrown at it. It has been hiking, scrambling/climbing, rappelling, down mines and caves, and it performs flawlessly.
I would recommend this piece of kit for anybody who needs their gear close by but doesn’t want/can’t have a pack. The possibilities and situations that this vest can be setup for and used in are literally infinite. I am going to use this vest for a long time to come, and I plan to get at least one more for more urban uses.
CamelBak Delta-5 Specs:
Hydration Capacity: 102 oz. [3.1L] (OMEGA™ Water Beast reservoir)
Cargo Capacity: 500 oz. [8.2L]
MOLLE compatible front and rear
Ambidextrous, no-slip butt stock seating
Ambidextrous metal sling/accessory attachment points
Velcro for ID and patches
Adjustible to fit most sizes, with or without body armor.
Heavy-duty, low profile drag handle
Wednesday, October 14, 2009
Beyond Has a Cool Catalog... and More!


I'm not really big on traditional “press blogging”. You'll never see many press releases (other than from BFE Labs) or similar updates here. There are some truly excellent blogs tracking product and systems developments in the tactical fields, such as SoldierSystems. I have no desire to compete with them.
But occasionally, I can't help but be impressed enough by a press effort or something other than the actual product in my hands, to want to share it.
Beyond Clothing managed to impress me today: I got one of their catalogs in the mail.
It's simple, one sheet of heavy glossy paper, folded. What makes it cool is that isn't not a read me, look at the pictures, type catalog. It's a touch, feel, see type catalog. On the interior are several 1.25”-ish swatches of various fabrics used by Beyond.
I'm a combined learner – My thinking and learning styles combine visual, tactile, textual and audiological. However, I'm also a builder, and having things in my hands is important to me. A lot of people are fairly similar, and actually having a thing in their hands makes a world of difference.
Beyond has grasped this concept with their catalog. It's pretty cool.
Cooler yet, their product offerings. I'm really impressed with the look of much of Beyond's clothing, particularly their Tactical offerings. I also find their ethos and methods notable. They seem to be an innovative business, dedicated to their end users. Several of their products are on my short list to purchase eventually, and I particularly want to try their BDU's out in some difficult places like the mines. When I do, expect to hear all about it!
Check them out, and get a catalog if nothing else!
(Yeah, I'm easily impressed by brightly colored small objects I can fiddle with... so what?)
Saturday, September 19, 2009
A Word on Reviews and Procedures
Although we strive to create a body of original knowledge as our primary product, equipment evaluations and reviews remain a part of what BFE Labs does. Conducting evaluations and publishing reviews presents several advantages and opportunities that otherwise wouldn't be available.
Primarily, it gives us a venue in which to elaborate on certain products without detracting from articles and tutorials. There are products and tools which merit significant attention, that cannot (and should not) be given in more general articles where it would distract from the main thesis. Many of these products, by themselves, have such a significant impact on the field that not making the effort to fully evaluate and report on them would put BFE Labs behind the power-curve – If knowledge is our product, we do a disservice to our readers and clients if we lack knowledge of a potentially life saving, or potentially dangerous, product.
Another advantage to evaluations and reviews is that they sometimes allow us access to tools we might not otherwise be able to field. When purchasing equipment for our own work, expeditions and training, we prioritize what we need the most urgently and consequently a large part of the evaluations done, and gear discussed, is our personal equipment. But, we are open to manufacturers supplying testing and evaluation samples, and in many cases will seek out those opportunities for special items. These evaluation opportunities allow us to access a range of products than may not be practical for us to purchase in the near-term. Manufacturer cooperation gives us the ability to provide more in-depth and relevant coverage of our chosen fields, more rapidly, than we might otherwise be able to. It also presents the manufacturer with opportunities for new, and sometimes different, feedback from our unique environments and experience, and the chance to reach our readers with their product.
We seek to provide both the end user, and the manufacturer, with evaluations that will contribute positively to what they know, what they do and how they do it. We greatly appreciate the manufacturers who've supplied us items for evaluation, and the relationships of cooperation and mutual respect that've been built from those experiences.
However – Reviews are not advertisements. We evaluate everything impartially, and without favor or dis-favor save what is incurred due to performance of the product being evaluated. We do not play favorites or give preference to those who give us products. Manufacturer submitted equipment and gear gets no easier a ride for being submitted, than it would if we purchased it.
If something sucks, we're going to say that it sucks, why it sucks and (generally) what we feel could be done to make it not suck. Our goal is to improve the field – Making end users aware of good products, warning them of bad, and contributing to the knowledge of manufacturers and suppliers.
Vice that, we are also not going to say something sucks if it does not. Whatever personal feelings we, or friends/associates of ours, may have about individuals or companies they have no bearing either way on our evaluations or reviews. Our goal is not to take-down manufacturers, or imply any qualities (positive or negative) about anything other than the product in question. We're not in the business of manufacturer or character assassination and pursue no agenda in our evaluations or reviews other than to provide bias-free testing and reporting on a given product while in actual use.
Similarly, we're not Twitter – There is, and will remain to be, a dearth of news releases and un-evaluated product announcements on the BFE Labs pages. There are already several excellent blogs in the field which specialize in that type of publication, and they are an excellent resource. BFE Labs is about proven solutions, not attractive ideas – If the attractive idea proves out in our use, then we'll report on it. We seek to be an experienced voice, that can be trusted to provide information grounded in actual use – End users, who can be trusted by end users.
In conducting evaluations and publishing reviews, we make our experience and knowledge freely available in the hope of bringing good things to life in these fields – Awareness of good products, greater knowledge of use of equipment and gear, and improved performance among end users, innovators and manufacturers.
Primarily, it gives us a venue in which to elaborate on certain products without detracting from articles and tutorials. There are products and tools which merit significant attention, that cannot (and should not) be given in more general articles where it would distract from the main thesis. Many of these products, by themselves, have such a significant impact on the field that not making the effort to fully evaluate and report on them would put BFE Labs behind the power-curve – If knowledge is our product, we do a disservice to our readers and clients if we lack knowledge of a potentially life saving, or potentially dangerous, product.
Another advantage to evaluations and reviews is that they sometimes allow us access to tools we might not otherwise be able to field. When purchasing equipment for our own work, expeditions and training, we prioritize what we need the most urgently and consequently a large part of the evaluations done, and gear discussed, is our personal equipment. But, we are open to manufacturers supplying testing and evaluation samples, and in many cases will seek out those opportunities for special items. These evaluation opportunities allow us to access a range of products than may not be practical for us to purchase in the near-term. Manufacturer cooperation gives us the ability to provide more in-depth and relevant coverage of our chosen fields, more rapidly, than we might otherwise be able to. It also presents the manufacturer with opportunities for new, and sometimes different, feedback from our unique environments and experience, and the chance to reach our readers with their product.
We seek to provide both the end user, and the manufacturer, with evaluations that will contribute positively to what they know, what they do and how they do it. We greatly appreciate the manufacturers who've supplied us items for evaluation, and the relationships of cooperation and mutual respect that've been built from those experiences.
However – Reviews are not advertisements. We evaluate everything impartially, and without favor or dis-favor save what is incurred due to performance of the product being evaluated. We do not play favorites or give preference to those who give us products. Manufacturer submitted equipment and gear gets no easier a ride for being submitted, than it would if we purchased it.
If something sucks, we're going to say that it sucks, why it sucks and (generally) what we feel could be done to make it not suck. Our goal is to improve the field – Making end users aware of good products, warning them of bad, and contributing to the knowledge of manufacturers and suppliers.
Vice that, we are also not going to say something sucks if it does not. Whatever personal feelings we, or friends/associates of ours, may have about individuals or companies they have no bearing either way on our evaluations or reviews. Our goal is not to take-down manufacturers, or imply any qualities (positive or negative) about anything other than the product in question. We're not in the business of manufacturer or character assassination and pursue no agenda in our evaluations or reviews other than to provide bias-free testing and reporting on a given product while in actual use.
Similarly, we're not Twitter – There is, and will remain to be, a dearth of news releases and un-evaluated product announcements on the BFE Labs pages. There are already several excellent blogs in the field which specialize in that type of publication, and they are an excellent resource. BFE Labs is about proven solutions, not attractive ideas – If the attractive idea proves out in our use, then we'll report on it. We seek to be an experienced voice, that can be trusted to provide information grounded in actual use – End users, who can be trusted by end users.
In conducting evaluations and publishing reviews, we make our experience and knowledge freely available in the hope of bringing good things to life in these fields – Awareness of good products, greater knowledge of use of equipment and gear, and improved performance among end users, innovators and manufacturers.
Tuesday, September 8, 2009
A Link for the Fire Brothers & Sisters
A friend on Total Protection Interactive reminded me of an excellent website today.
VentEnterSearch: The Lost Art of the Fire Service
I'm not a structure fire guy, and my real-world experience with fire at all remains limited, but I've found valuable stuff for my own purposes on VentEnterSearch.
The content in particular that was linked on TPI, reminding me of the site, was their "Whats in your pockets?" page. Some really cool ideas, and for those not in the fire service, a good look at tools valuable in the urban environment when things go wrong. For those without the luxury of a shop full of tools, and looking for ideas for their disaster survival or urban escape & evasion/bug-out bags, this is a valuable bit of info.
Be safe out there!
VentEnterSearch: The Lost Art of the Fire Service
I'm not a structure fire guy, and my real-world experience with fire at all remains limited, but I've found valuable stuff for my own purposes on VentEnterSearch.
The content in particular that was linked on TPI, reminding me of the site, was their "Whats in your pockets?" page. Some really cool ideas, and for those not in the fire service, a good look at tools valuable in the urban environment when things go wrong. For those without the luxury of a shop full of tools, and looking for ideas for their disaster survival or urban escape & evasion/bug-out bags, this is a valuable bit of info.
Be safe out there!
Labels:
FireFighting,
Gear,
Links
Sunday, August 23, 2009
NuMask IntraOral Mask and Oropharyngeal Airway

I picked up a couple samples of the NuMask Inc., IntraOral Mask (IOM) and Oral Airway (OPA). While I've not had the opportunity to actually use the IOM, it seems to be a pretty neat idea.
Whereas a conventional ventilation mask fits over the mouth and nose, the NuMask IOM goes inside the front of the mouth, between the lips/cheeks and the teeth/gums. The IOM is enhanced by an oral airway which fits against it, in a fitted recess, providing positive engagement between the devices.
During mask ventilation with a conventional mask, ala the Bag-Valve-Mask, pressure against the face is required to keep it in place and ensure positive ventilation. This can be problematic (to say the least) in cases of facial injury where putting pressure against the face can make things worse.
While the trained provider is likely to counter the situation by intubating, that may be outside the skill level of initial responders. As the NuMask IOM removes the need to exert pressure against the face, it may be a viable option for First Responders, and Basic level providers (who in some area's still cannot intubate), for providing positive air pressure ventilation for maxillofacial trauma patients prior to intubation/arrival of a provider capable.
The NuMask may also have additional benefits, making the provider's life easier at least: Bagging, while regularly taught as a two person skill, is a single-provider task in the real world, and the ease and security of the IOM's placement may make that task somewhat less awkward. NuMask also produces a soft head-wrap type device to hold the IOM in place properly, without requiring hands on.
Traditional masks also have some difficulties in getting a proper fit over facial hair and other facial irregularities, which wouldn't be a problem for the IOM.
NuMask also advertises, and I would suspect rightly so, that the IOM is much easier to use in a variety of positions than a traditional mask, which can be difficult to properly hold in cramped or awkward quarters. For the extreme environment, the IOM may offer a lot over more conventional set-ups.
NuMask is currently giving out samples of the IOM and OPA set at www.numask.com – Stop by and grab one, and take a look at their other offerings.
I'm thinking their Intra-Oral Mask Bag Valve resucitator kit would make a nice, lightweight and compact, option for mine exploration/caving medicine.
Wednesday, August 19, 2009
All Your Base are Belong to BFE Labs...
Expanding our reach further into the social networks, I've gone ahead and put up a Facebook page for BFE Labs. If you enjoy what you've read here, and want to be a little more inside the loop on new developments, become a fan!
BFE Labs - Facebook Page
I'm not quite sure exactly how we'll be using this, but we will be adding more content to the page as time goes on, and not just rehashing what's been posted here. Any upcoming course work or events will probably be on the page before they are posted on here, so keep your eyes open!
BFE Labs - Facebook Page
I'm not quite sure exactly how we'll be using this, but we will be adding more content to the page as time goes on, and not just rehashing what's been posted here. Any upcoming course work or events will probably be on the page before they are posted on here, so keep your eyes open!
Labels:
BFE Labs,
Courses,
Networking
Tuesday, August 18, 2009
Ultimate Survival Technologies Sparkie
Ultimate Survival Technologies has long been recognized as a producer of high quality and innovative survival solutions. One of their more noted innovations has been the BlastMatch one-handed fire starter. Successfully combining a large ferrocerium “steel” with a unique design, allowing for use when injured or disabled, the BlastMatch has been a hit for several years now. About the only complaint that anyone could come up with was that it wasn't exactly small. Late last year, Ultimate Survival Technologies introduced a smaller sparking unit, based on the BlastMatch concept, that deals with this “issue”.
Called the Sparkie, this tool features a similar one-handed operating concept, but using a smaller ferro rod, supported on an ABS carriage, and an overall smaller housing. The body of the Sparkie is ABS plastic, with a rubber sleeve for grip. The sleeve is either orange or a tan/cream color. The unit weighs 24-grams (.85 oz), and measures (closed) 2.3 x 1.2 x 0.7 inches (5.8 x 3.0 x 1.7 cm). The Sparkie comes packaged either in a plain cardboard box, or in a blister-pack for retail display, and comes with a cube of UST's excellent WetFire tinder.
To operate the Sparkie, the user has a couple of available options. The first is to place the end of the extended rod carriage against a surface, at a 75 – 90 degree angle, and with the thumb depressing the striker against the rod press down sharply. This pushes the ferro rod/carriage into the housing, against the pressure of the striker blade, which shaves the ferro rod to create sparks. The second option is to use the thumb, or extended forefinger, to operate the carriage while applying force with the closed hand or thumb to compress the thumb tab above the striker.
Labels:
Fire,
Gear,
Reviews,
Survival,
Tinder/Tools,
Ultimate Survival Technologies,
Wilderness
CamelBak Delta-5 Tactical Hydration Vest


(James Mac, of BFE Labs, has been working on refining his personal set-up for first and second line gear, and has picked up a CamelBak Delta-5 Tactical Vest in the process. He's taken it on various excursions and put it to repeated use as a load-bearing system for abandoned mine exploration. His professional responsibilities to the weapons lab where he works have kept him from penning a full review, but he prepared the following initial impressions awhile ago and wanted to go ahead and run them until he could finish a complete review.)

First impressions: Straight out of the “box” the Delta 5 looks like a simple LBE vest that is covered in MOLLE compatible webbing. It has an insulated pocket for the included 102 oz. bladder. It also has an attachment system for a belt, it seems that donning and doffing multiple times will be inconvenient. I have estimated about 15 minutes to doff and don. The vest is fully adjustable, including shoulder adjustments. Once adjusted it felt really comfortable. I ended up wearing Under Armour heat gear under the vest because of the form fitting nature of the rig. I have it setup up with numerous 5.11 VTAC pouches. I have it loaded with my essential must-haves, including: Blow-out and boo-boo kits, my XD-45, E-tool, MRE's, binoculars. All this gear weighs in between 40 and 50 pounds. The weight was well balanced enough to feel like 20 pounds. It worked well while scrambling up and down rocks. Feels good for hiking, looking forward to taking it in a cave or a mine. [Editors note: James has had this rig down hole since he wrote this, and came away pleased with its performance]
I have done some experimenting with carrying a pack on top of the Delta 5. With the pouches removed from the back of the vest it is very easy to adjust a pack to fit well. It is helpful that my normal pack has the ability to carry MOLLE pouches. I have timed myself in taking the pouches off my pack and putting them on the vest (already doffed), it takes about 6-7 minutes; even in the dark. [Ed.: CamelBak's PALS webbing is well sewn, with even spacing, making attaching and detaching pouches far less of a hassle than some systems with inconsistent spacing].

[Editor adds:]
Specs on the CamelBak Delta-5 are as follows:
Hydration Capacity: 102 oz. [3.1L] (OMEGA™ Water Beast reservoir)
Cargo Capacity: 500 oz. [8.2L]
MOLLE compatible front and rear
Ambidextrous, no-slip butt stock seating
Ambidextrous metal sling/accessory attachment points
Velcro for ID and patches
Adjustible to fit most sizes, with or without body armor.
Heavy-duty, low profile drag handle
We'll be posting a finished review of the Delta-5 in the future, and hopefully at some point James will further elaborate on his overall kit, and the evolutionary process behind it.
Thursday, July 30, 2009
"Its The Tribes, Stupid"
I posted this via the oft-ignored BFELabs Twitter feed, and managed to screw up the link, so I'll just put it here and do a proper job of it.
Steven Pressfield, author and historian (author of Gates of Fire, among others), has been, for about two months now, publishing a blog on Tribalism and warfare, specifically in Afghanistan. It began with a five part video series, and has continued as a series of blog writings. It is very good.
Pressfield has also posted about other topics, primarily writing, and he's had good things to say on that front too. Things which a lot of bloggers (even tacti-bloggers) could learn from, including me as the BFE Labs proprietor and mouth-piece in charge.
Pressfield's blog has become one of my favorites, rather rapidly, and in my opinion is one of the best of its kind out there. I encourage you to check it out.
"Its the Tribes, Stupid" - http://blog.stevenpressfield.com/
Steven Pressfield, author and historian (author of Gates of Fire, among others), has been, for about two months now, publishing a blog on Tribalism and warfare, specifically in Afghanistan. It began with a five part video series, and has continued as a series of blog writings. It is very good.
Pressfield has also posted about other topics, primarily writing, and he's had good things to say on that front too. Things which a lot of bloggers (even tacti-bloggers) could learn from, including me as the BFE Labs proprietor and mouth-piece in charge.
Pressfield's blog has become one of my favorites, rather rapidly, and in my opinion is one of the best of its kind out there. I encourage you to check it out.
"Its the Tribes, Stupid" - http://blog.stevenpressfield.com/
Labels:
Afghanistan,
Knowledge,
Links,
Mindset,
Outside The Box
Monday, July 13, 2009
Compact Gauze - More Solutions Are Needed


Thanks to a friend on Total Protection Interactive, I've got a package of North American Rescue Products S-Rolled Gauze to play with, and its prompted some thoughts on compact gauze solutions.Gauze is one of the essential tools of trauma management. Roller gauze can be used for a multitude of things, from wound cleaning and dressing, to wound packing for hemorrhage control, and is an essential for every well stocked first aid kit.
The problem in many settings in which space is at premium, is that roller gauze is not small. A package of large/standard (4.5” x 4.1yds) Kendall Kerlix roller-gauze is roughly 5 ½” x 3” x 2”. It can be smashed down smaller inside a pouch or bag, but its still bulky.
The solution to this is vacuum packing for compression of the gauze. H&H Medical, maker of the Cinch-Tight, produces one such solution, PriMed Gauze. NARP's S-Rolled gauze is another such solution.
The PriMed gauze puts a standard large gauze roll into a cube approx. 2 ½” x 3” x ½”.
The S-Rolled gauze puts the same size roll into a package roughly 8" x 4 ½" x 1" (at thickest).
The NARP product has a lot of excess plastic. It can be folded down to a more compact 5" x 3" x 1".
(Note in the photos, the PriMed gauze shown is slightly larger than normal, as its package got a pinhole in it allowing some air entry, and increasing its size fractionally. Its not that far off, however.)
Both of these products do a good job of reducing the space necessary to carry a full roll of gauze, but there are still niches in this area that could be filled.
Neither of these products fit particularly well into small pouches, or pocket sized kits. The PriMed probably achieves the most absolute compaction of the gauze, but the cube like form factor makes an awkward shape in some kits, and can create an uncomfortable lump when placed in a pocket.
The S-Rolled gauze has too much extra plastic in the packaging, and is too inconsistent in thickness/thinness to be any more ideal a solution for these spaces. Were the packing slightly more compact, and the packing more uniformly flat, it would be an almost ideal tool for pocket carry, pre-packed vacuumed kits (ala ResQPak), and other space restricted applications.
The need for some alternate form factors of compact gauze packaging isn't just limited to pocket carry. Not everyone running a dedicated blow-out-kit pouch has the room available for a full size gauze roll, and for many, even these extant solutions are far from ideal. In the law enforcement environment, for example, a common complaint against blow-out kits is that they simply take up too much room on an already crowded duty belt - Solutions that work often make use of absolutely minimalist tools, or heavy vacuum packing of contents. Even then, these heavily vacuum packed gauze solutions may be abandoned for an easier to carry, but less effective, tool such as an abdominal pad, or abandoned all together.
A flat packing, in-obtrusive, gauze package that contained a compressed full 4.5" x 4.1 yds gauze roll would solve many of these problems. It could be as large as the folded-up S-Rolled gauze (5" x 3") provided it was no more (and ideally less) than 1/2" thick. If PriMed can be packed that small and not be any thicker than that, something taller and wider certainly should be able to. And it should be packed consistently, with uniformity in the final packaging.
The need exists. Does a solution? The two obvious contenders are those who've already brought useful compact gauze solutions to the market - H&H and NARP. Their products are excellent, and have a valid place, but can more, better, can be achieved for different needs?
Labels:
Medical
Friday, June 19, 2009
Bad Medicine & Validation
Opinions are like assholes, some say, in that everyone has one. I’d argue that assholes are much more wholesome than opinions in that people only have one, and they tend to keep it at least moderately clean. Opinions are a much more fecund and foul field. Particularly in medicine.
How bad this can get varies somewhat depending on where you are, at what practitioner level, and what the subject is. At the practicing professional level there are still arguments and opinions, but there is a high level of knowledge-maintenance performed on the wide array of common things and everyone is pretty much on the same page.
This is of course limited at times by the given specialties of the practitioner in question, as their knowledge will be focused on their specialty or area of expertise. But, there is a standard of knowledge maintenance. And that knowledge is well founded, based on scientific research and study – It’s not something their buddy repeated after having a beer with a guy who said he used-to-was an 18 Delta.
I say this because as you move into the less professional realms of medicine, particularly those revolving around providing civilians and non-medical personnel with medical skillsets, you start seeing a lot less of the former, and a lot more of the latter. Now, this is probably not the rule, but it is a hyper-prevalent exception.
How bad this can get varies somewhat depending on where you are, at what practitioner level, and what the subject is. At the practicing professional level there are still arguments and opinions, but there is a high level of knowledge-maintenance performed on the wide array of common things and everyone is pretty much on the same page.
This is of course limited at times by the given specialties of the practitioner in question, as their knowledge will be focused on their specialty or area of expertise. But, there is a standard of knowledge maintenance. And that knowledge is well founded, based on scientific research and study – It’s not something their buddy repeated after having a beer with a guy who said he used-to-was an 18 Delta.
I say this because as you move into the less professional realms of medicine, particularly those revolving around providing civilians and non-medical personnel with medical skillsets, you start seeing a lot less of the former, and a lot more of the latter. Now, this is probably not the rule, but it is a hyper-prevalent exception.
Tuesday, June 16, 2009
5.11 Chest Rig - Initial Impressions
For awhile now I’ve had interest in playing with some simple chest-rig configurations for somewhat unconventional purposes. Namely, supporting firearms not commonly supported by modern tactical gear, and load-bearing for non-tactical purposes. The easiest solution for adapting to something unconventional is to start with a highly modular platform. The obvious conclusion is a strictly MOLLE chest rig. Also as noted in some previous writing, this type of load bearing equipment arose as a possible solution for mine exploration work as well.
There are a bevy of options for this type of rig out there, almost everyone makes some variant of a plain-MOLLE chest rig. One of the more recent entrants into that field is 5.11
Known for their clothing, 5.11 Tactical has only more recently begun to expand their line into tactical gear proper. Among other things, they offer a small handful of packs and bags, and a growing range of MOLLE compatible pouches and rigs.
These offerings seem to be aimed at providing a low cost alternative, that delivers higher quality than airsoft grade drek without the price of higher end gear. I don’t think anyone is expecting Eagle, Tactical Tailor, Emdom or Paraclete for the prices 5.11 is asking, including 5.11 themselves.
The chest rig from 5.11 is a simple design, using basic features to create a robust platform rather than going for anything too “whiz-bang”. The rig is a simple mesh panel, with PALs webbing across the front, and a mesh pocket its width across the rear. The X-harness attaches to the chest rig via four UTX Flex side-release buckles, two at the top and one on each side. The construction of the rig seems solid enough. I’ve seen more bombproof stitching methods than are used here, but I see no obvious problems with those used. Again, for a $29.99 product, this is a step above what is commonly available for those prices (i.e. airsoft crap). It has certainly, in my initial outings with it, held up better than airsoft-grade crap.
(More after the Jump)
Thursday, June 4, 2009
The SWAT Tourniquet
The essential element of bleed management in the tactical setting is the tourniquet. It is not ideally a stand alone tool, but in many ways it remains the tool. If no other tool is available, a tourniquet can be placed with life saving effect. Even when other tools are available, tourniquet placement on active extremity hemorrhage can mean the difference between a patient surviving to the point of further management and not. Tourniquets are the tool a fighter can apply rapidly and quickly, with a high level of certainty that blood loss will at least be reduced, and return to the fight after doing so.
What It Is:
There are a bevy of “tactical” tourniquets on the modern market. Primarily one hand designs, as necessitated by the realities of self care and the tactical environment, but of all shapes, materials and sizes. Many of them are overly complex, and yet others are absolutely simple.
Of the available options, it probably doesn’t get simpler than the Stretch, Wrap And Tuck Tourniquet (SWAT-T) from TEMS Solutions. The SWAT-T is absolutely minimalist design at its finest and most functional, being a simple band of latex-free rubber approximately 4-feet long, and 4 inches wide. Simple as it is, when properly applied the SWAT-T can deliver complete tourniquation of even larger limbs (muscular legs at the thigh).
To use the SWAT-T as a tourniquet, it must be wrapped around the limb (proximal placement, standard application for any tourniquet) under tension. Pulling the SWAT-T, stretching the material constantly as it is wrapped, allows it to be wrapped extremely tightly. Once wrapped, to secure it, you simply lift an edge of the material and tuck the running end firmly under. The material, being somewhat self adhering, pulls down against itself as it tries to relax into its unstretched state. This both locks the running end firmly in place, and pulls the tourniquet even tighter on the limb. Application is fast, secure, and effective.
On the SWAT Tourniquet website, www.SwatTourniquet.com, several videos of it being applied are posted. In each video, vascular Doppler is used to measure flow (or, lack of flow as the case is) after application. The flow in both leg and arm applications is completely occluded. This has been duplicated in independent review posted by a moderator on the Professional Soldiers board, and quoted in a Powerpoint issued by SWAT Tourniquet.
In addition to functioning as a tourniquet, the SWAT-T can function as pressure dressing, elastic wrap or in an emergency splinting role. The tourniquet is printed with a series of directions and simple symbols, indicating when it is stretched enough to provide the proper amount of pressure for effective tourniquation. When applying it for other purposes, you simply don’t stretch it as much. The visual indicators on the tourniquet are a very effective guide for applying it correctly.
The developer has reported that those unfamiliar with the SWAT-T, upon being handed it and looking at the instructions, take an average of around twenty seconds to successfully apply it. Given its intuitive simplicity, clear packaging instructions and on-board visual feedback, this should be no surprise.
Tuesday, June 2, 2009
Snake Bite

Growing up in the hinterlands of New Mexico, and continuing to live, work and play in suburban, rural or plumb bum-fuck-Egypt areas, I’ve had my share of run ins with snakes. There have been, of course, the harmless run ins, which I usually encouraged. Namely, the bullsnakes and racers I’d catch as a kid, shutting them up in a terrarium for a week or two before depositing them back where I nabbed them. Then there were the run ins with the less desirable element of the serpent world – Venomous snakes, particularly rattlesnakes.
I have stepped on, kicked, almost sat on, put my hand down on, been crawled over and been struck by both Western Diamondback and Prairie Rattlers. I’ve had close calls of less dramatic nature with most other species of rattler in the southwest, to include Mojave and most recently Timber rattlers.
After this most recent encounter, while hiking to a mountainous mine adit, I was musing on my personal history with rattlers. I mentioned to my companions that eventually my snake luck is going to run plumb out, though I honestly hope not. Having my boots struck but not penetrated is more than close enough for me.
But this encounter and my experiences in the past, led me to doing a mental review of what I know about snake bite medicine. What I came up with was both woefully short, in my estimation, and far better than what I hear being repeated around various communities I’m part of.
Given that, I thought it might be beneficial to put together a little something on venomous snake-bite, and good practices related there-to. Something between an actual article, and a literature review. Both for my own benefit, as I expand what I know, and to build on the obvious gap in whats commonly published.
Labels:
Medical,
Wilderness
Sunday, May 31, 2009
Chest Rigs in Abandoned Mines and Other Ideas Explored

This past Saturday, I, along with Ian Wendt of Special Circumstances and two of our friends, went for an extended wander. It was a great single day of hiking and exploring. Eight hours of near-non-stop movement through pretty rough country (7000 - 8000+ feet elevation, with rapid drops and rises between that range), plus some forays into abandoned mines.
We had struck out with the hope of entering a specific mine, but found our way blocked, and rather than give up we went for a wander. Looking, of course, for other dark holes to poke around in. We found a few, mostly short and un-interesting. The last one however provided a few hours of good exploration and some opportunity to test some things out.
The folks from 5.11 were kind enough to send me one of their MOLLE compatible chest rigs to T&E. I don’t think they had abandoned mine exploration in mind when they provided the sample, but this was my first opportunity to seriously use the rig after receiving it. }
Our little crew of intrepid idiots… erhm, adventurers, has been talking about changing up our load-bearing methods for working in the mines and using chest-rigs or load-bearing vests has come up as a very workable idea. This was the first time any of us has tested it however.
Labels:
Abandoned Mine Exploration,
Gear
Wednesday, May 13, 2009
Carrying the Blow Out Kit
In recent years as we’ve seen a rise in widespread study and application of tactical medicine, we’ve seen a trickle down of those concepts to the armed citizen. There has been a corresponding rise in people carrying blow-out kits. But for every one who is aware of this need and acts accordingly, there remain a handful that are aware yet carry nothing.
There will always be the willfully ignorant, who want to deny the need for medical skills in the arena of violence, but worse yet are those who are aware and yet carry nothing. Particularly they who have at least a modicum of skill for managing life threatening penetrating injury, and yet still do not carry a blow-out-kit. Their reasoning often involves a certain degree of the aforementioned willful stupidity, but it is mostly complacency. They didn’t need a blow-out kit yesterday, the gear takes up a lot of space, and they’re only going out for a little bit, and so on and so on.
In my experience personally, and with students and friends, this type of “reasoning” is pervasive, and it almost always revolves around a single point: The gear is bulky, and takes up a lot of real estate.
While true, realistically, this is a cop out. A handgun and two reloads are bulky and take up a lot of space to carry too. I think if medical gear had as ego boosting an image as a handgun, perhaps more people would carry it – A bad guy full of smoking holes will however always be a more appealing mental image than you full of smoking holes.
That said, yes, a blow-out kit can be a hassle to carry, but it can be done.
There will always be the willfully ignorant, who want to deny the need for medical skills in the arena of violence, but worse yet are those who are aware and yet carry nothing. Particularly they who have at least a modicum of skill for managing life threatening penetrating injury, and yet still do not carry a blow-out-kit. Their reasoning often involves a certain degree of the aforementioned willful stupidity, but it is mostly complacency. They didn’t need a blow-out kit yesterday, the gear takes up a lot of space, and they’re only going out for a little bit, and so on and so on.
In my experience personally, and with students and friends, this type of “reasoning” is pervasive, and it almost always revolves around a single point: The gear is bulky, and takes up a lot of real estate.
While true, realistically, this is a cop out. A handgun and two reloads are bulky and take up a lot of space to carry too. I think if medical gear had as ego boosting an image as a handgun, perhaps more people would carry it – A bad guy full of smoking holes will however always be a more appealing mental image than you full of smoking holes.
That said, yes, a blow-out kit can be a hassle to carry, but it can be done.
Notes on Mine Exploration Gear
I was doing some reading tonight, and making notes on up-coming projects and ideas, and a few musings seemed to be worth sharing.
The wrecking crew and I are talking about going back into the mines (a mine, some mine, any mine) sometime soon. It is one of those things that, once you’ve started, get’s harder and harder to resist. The need to go back in starts building, a curiosity at first and then a driving, desperate, need. It’s a great feeling.
With this coming up, and the recent overview of abandoned mine exploration, I’ve been thinking over some gear selection, and wanted to make a few notes.
The wrecking crew and I are talking about going back into the mines (a mine, some mine, any mine) sometime soon. It is one of those things that, once you’ve started, get’s harder and harder to resist. The need to go back in starts building, a curiosity at first and then a driving, desperate, need. It’s a great feeling.
With this coming up, and the recent overview of abandoned mine exploration, I’ve been thinking over some gear selection, and wanted to make a few notes.
Labels:
Abandoned Mine Exploration,
Gear
Monday, April 27, 2009
Abandoned Mine Exploration
Abandoned mine exploration is a regular endeavor at BFE Labs – Its enjoyable for several reasons, but primarily for the challenges to the mind and physical body, and opportunities to test and refine skills and gear, that this type of exploration presents. I’ve received a few questions about exactly what this entails, and how it contributes significantly to any of the reviews conducted and the experience behind our work – I think the best way t o explore that question is to explore the activity.
Before continuing, a safety note - Abandoned mines are dangerous places. Operational mines are dangerous enough, but once a mine has been abandoned, and stops receiving upkeep and maintenance from trained engineers, it becomes much more so. With time support beams and ladders rot, bolts and cables rust, and natural processes of water erosion and tectonic activity take their toll. Abandoned mines are not places to play, party, or screw.
Abandoned mine exploration is a dangerous activity. It should only be undertaken by those who have the proper technical equipment, and who have a good knowledge of the mine they are entering, the geology of the area, and the risks of abandoned mines.
Mine exploration can be as technical an endeavor as formal caving, or rock climbing. Safety equipment and protection (pro) aren’t friendly suggestions, they are musts. Helmets, harnesses and ropes (if doing any climbing or descending at all), durable long-burning headlamps and secondary (even tertiary) backup lights, solid footwear, tough clothing, dust masks, gloves and prior planning are essential for entering any mine! Anyone who refuses to heed these warnings is taking their life in their hands.
Neither BFE Labs, nor Morgan Atwood, nor any associates there-of who are mentioned or depicted in this article, or other BFE Labs writings, are responsible for you or your well-being if you undertake abandoned mine exploration. No part of this writing is intended to be an endorsement of this activity, or any equipment, as safe, sane, or appropriate. Abandoned mine exploration may be illegal in your area as well. Once again, we are not responsible if you are a jackass and get arrested, injured or killed. In the case of death resulting from undertaking abandoned mine exploration because of this or any other writing, we will send flowers, and a thank you card for removing yourself from the gene pool.
There are a vast amount of abandoned mines in New Mexico, particularly in our immediate area. They range from simple shafts dug straight down by small groups of dedicated hard men, to extremely complex tunnel systems, running deep into the earth for 30 or more miles. Exploring these abandoned tunnels is an extremely unique experience, and environment for testing skills, mindset and equipment.
The demand on men and equipment of this type of exploration is high – Traversing tunnels and stopes requires not just walking but crawling, climbing, and squeezing. A high level of physical ability is nearly essential in this environment, and is taxed heavily by some of the subterranean demands. Beyond the body, anything and everything carried into the mines is heavily tested. Dust, abrasive rock, tight spaces and the incomprehensible blackness combined put a strain on everything from footwear, clothing and packs to flashlights, harnesses and ropes. The mines are a heavily demanding environment, in which a misstep or failed equipment could easily cost a life.
Going into the mines we (and I will continue to speak primarily of we, as this is never an activity to undertake alone, or with untrusted partners) have specific requirements and demands for ourselves and our gear.

Primarily, gear has to be tough, and without sacrificing security, minimalist. Shoes/boots must provide secure, solid grip on a variety of terrain, and good support for the foot and ankle. Pants, shirts and jackets (average mine temperature is around 40-45 degrees Fahrenheit though some are colder) must be made of tough, puncture and abrasion resistant materials. Packs must be equally abrasion resistant, and slim; contouring to the body well, and maintaining a low profile along the back for fitting through narrow tunnels and stopes, while still carrying all necessary secondary equipment. Gloves must be abrasion resistant, but cannot be too thick or limiting in dexterity or grip, allowing maximum purchase and sensation. Helmets must provide adequate bump shielding against both unexpected intersections with the ceiling or walls, and against falling debris, without being so large as to increase unwanted ceiling contacts. Lights must be secure in their mounting to the helmets, provide a high level of light for an extended period of time and be relatively tough to resist bumps, jogs and shocks. All this gear has to work together, as one functional package. Like anything else, this is not multiple elements of gear used independently in the same environment, it is a functionally seamless whole.
Before continuing, a safety note - Abandoned mines are dangerous places. Operational mines are dangerous enough, but once a mine has been abandoned, and stops receiving upkeep and maintenance from trained engineers, it becomes much more so. With time support beams and ladders rot, bolts and cables rust, and natural processes of water erosion and tectonic activity take their toll. Abandoned mines are not places to play, party, or screw.
Abandoned mine exploration is a dangerous activity. It should only be undertaken by those who have the proper technical equipment, and who have a good knowledge of the mine they are entering, the geology of the area, and the risks of abandoned mines.
Mine exploration can be as technical an endeavor as formal caving, or rock climbing. Safety equipment and protection (pro) aren’t friendly suggestions, they are musts. Helmets, harnesses and ropes (if doing any climbing or descending at all), durable long-burning headlamps and secondary (even tertiary) backup lights, solid footwear, tough clothing, dust masks, gloves and prior planning are essential for entering any mine! Anyone who refuses to heed these warnings is taking their life in their hands.
Neither BFE Labs, nor Morgan Atwood, nor any associates there-of who are mentioned or depicted in this article, or other BFE Labs writings, are responsible for you or your well-being if you undertake abandoned mine exploration. No part of this writing is intended to be an endorsement of this activity, or any equipment, as safe, sane, or appropriate. Abandoned mine exploration may be illegal in your area as well. Once again, we are not responsible if you are a jackass and get arrested, injured or killed. In the case of death resulting from undertaking abandoned mine exploration because of this or any other writing, we will send flowers, and a thank you card for removing yourself from the gene pool.
There are a vast amount of abandoned mines in New Mexico, particularly in our immediate area. They range from simple shafts dug straight down by small groups of dedicated hard men, to extremely complex tunnel systems, running deep into the earth for 30 or more miles. Exploring these abandoned tunnels is an extremely unique experience, and environment for testing skills, mindset and equipment.
The demand on men and equipment of this type of exploration is high – Traversing tunnels and stopes requires not just walking but crawling, climbing, and squeezing. A high level of physical ability is nearly essential in this environment, and is taxed heavily by some of the subterranean demands. Beyond the body, anything and everything carried into the mines is heavily tested. Dust, abrasive rock, tight spaces and the incomprehensible blackness combined put a strain on everything from footwear, clothing and packs to flashlights, harnesses and ropes. The mines are a heavily demanding environment, in which a misstep or failed equipment could easily cost a life.
Going into the mines we (and I will continue to speak primarily of we, as this is never an activity to undertake alone, or with untrusted partners) have specific requirements and demands for ourselves and our gear.

Primarily, gear has to be tough, and without sacrificing security, minimalist. Shoes/boots must provide secure, solid grip on a variety of terrain, and good support for the foot and ankle. Pants, shirts and jackets (average mine temperature is around 40-45 degrees Fahrenheit though some are colder) must be made of tough, puncture and abrasion resistant materials. Packs must be equally abrasion resistant, and slim; contouring to the body well, and maintaining a low profile along the back for fitting through narrow tunnels and stopes, while still carrying all necessary secondary equipment. Gloves must be abrasion resistant, but cannot be too thick or limiting in dexterity or grip, allowing maximum purchase and sensation. Helmets must provide adequate bump shielding against both unexpected intersections with the ceiling or walls, and against falling debris, without being so large as to increase unwanted ceiling contacts. Lights must be secure in their mounting to the helmets, provide a high level of light for an extended period of time and be relatively tough to resist bumps, jogs and shocks. All this gear has to work together, as one functional package. Like anything else, this is not multiple elements of gear used independently in the same environment, it is a functionally seamless whole.
Labels:
Abandoned Mine Exploration
Sunday, April 12, 2009
Imminent Threat Solutions
A post on the LightFighter forums brought a new website/blog to my attention this morning - Imminent Threat Solutions.
ITS Tactical is a group of experienced tactical professionals, who simply want to provide good information on gear and methods to the community. They are not a commercial reviewer, and have no agenda beyond sharing what they've found that works. This is an ethos I can very much identify with, and respect.
Reading what they have up so far I actually learned a few things, and have been extremely impressed with the content, presentation and attitude on whole. On a mostly personal note as an NDE enthusiast (and doing some work in that area currently), I was tickled to see them giving some attention to lockpicking as a skillset. It's so rarely talked about in anything other than hushed voices in this community, I'm glad to see someone giving it some attention.
At any rate - Thus far an impressive beginning, I'm looking forward to seeing what they've got to say in the future an dwill be saying tuned. You should check them out.
Imminent Threat Solutions - Tactical
ITS Tactical is a group of experienced tactical professionals, who simply want to provide good information on gear and methods to the community. They are not a commercial reviewer, and have no agenda beyond sharing what they've found that works. This is an ethos I can very much identify with, and respect.
Reading what they have up so far I actually learned a few things, and have been extremely impressed with the content, presentation and attitude on whole. On a mostly personal note as an NDE enthusiast (and doing some work in that area currently), I was tickled to see them giving some attention to lockpicking as a skillset. It's so rarely talked about in anything other than hushed voices in this community, I'm glad to see someone giving it some attention.
At any rate - Thus far an impressive beginning, I'm looking forward to seeing what they've got to say in the future an dwill be saying tuned. You should check them out.
Imminent Threat Solutions - Tactical
Monday, February 23, 2009
Self Care in the Tactical Environment & Other Medical Training
On the 21st of February we ran a beta for the Self Care in the Tactical Environment class, for a group of friends and out of town students. Ian Wendt of Special Circumstances assisted me with the class.
The class was essentially made possible thanks to generous donations from TEMS Solutions/SWAT-Tourniquet, First Care/PerSys Medical and Z-Medica - Thanks to everyone with these fine companies for your encouragement and support!
The class size was slightly smaller than we’d anticipated, due to some last minute back-outs, but was still a good sized student group.
As I’d hoped, the class went well and having the ability to evaluate the curriculum and teaching plan in the real world will be a great benefit to further evolutions of the course material.
In the coming weeks I will be posting the updated syllabus, developed based on this first class and subsequent student feedback. The syllabus will be part of a student guidebook, which will include the Guidelines for Self Care in the Tactical Environment, in addition to the Tactical Combat Casualty Guidelines and other information. The guidebook will be made available, probably as a .pdf, for free download, in addition to being offered for purchase in book form (printed student copies will be part of each student packet for future classes).
In addition to this new syllabus, the class is being re-worked based on the experience of running it, and the feedback received from the beta group. Details of this evolutions, and the training concepts behind the course material, will also be posted at some point in the near future.
(Photos & etc are below the jump).
The class was essentially made possible thanks to generous donations from TEMS Solutions/SWAT-Tourniquet, First Care/PerSys Medical and Z-Medica - Thanks to everyone with these fine companies for your encouragement and support!
The class size was slightly smaller than we’d anticipated, due to some last minute back-outs, but was still a good sized student group.
As I’d hoped, the class went well and having the ability to evaluate the curriculum and teaching plan in the real world will be a great benefit to further evolutions of the course material.
In the coming weeks I will be posting the updated syllabus, developed based on this first class and subsequent student feedback. The syllabus will be part of a student guidebook, which will include the Guidelines for Self Care in the Tactical Environment, in addition to the Tactical Combat Casualty Guidelines and other information. The guidebook will be made available, probably as a .pdf, for free download, in addition to being offered for purchase in book form (printed student copies will be part of each student packet for future classes).
In addition to this new syllabus, the class is being re-worked based on the experience of running it, and the feedback received from the beta group. Details of this evolutions, and the training concepts behind the course material, will also be posted at some point in the near future.
(Photos & etc are below the jump).
Sunday, February 15, 2009
A Sample of BFE Labs Non-Metallic Edged-Weapons Solutions
Non-Metallic tools, particularly edged weapons, have a small but distinct role. Their value to a client living or working in a non-permissive environment is unmatched.
As a knife-maker I've long specialized in this area of custom knife making. For several years now, I have focused on exploring the strengths and weaknesses of available non-metallic materials.
Although ceramics offer a great deal in terms of cutting performance and edge retention, their fragility and great expense make them a poor option for general carry and defensive use. In circumstances where there is a need for non-metallic cutting tools to perform repeated cutting, under relatively low strain, ceramics remain ideal.
However for limited, brief, use - As weapons, emergency backup tools - non-metallic knives made from synthetics offer a great deal. The best synthetic material I've found is woven carbon fiber. It offers enough edge holding capacity, combined with durability, to make an ideal deep-cover back-up knife.

A small hide-away blade, designed for aggressive cutting capabilities. Featuring a rubberized kydex sheath. The rubber coating offers improved traction, helping it to stay in position in deep concealment, and masking the noise of anything rubbing the kydex.
Another very small hideout - Featuring a sheath drilled for stitching into clothing in the style of WWII OSS/SOE escape knives.
As a knife-maker I've long specialized in this area of custom knife making. For several years now, I have focused on exploring the strengths and weaknesses of available non-metallic materials.
Although ceramics offer a great deal in terms of cutting performance and edge retention, their fragility and great expense make them a poor option for general carry and defensive use. In circumstances where there is a need for non-metallic cutting tools to perform repeated cutting, under relatively low strain, ceramics remain ideal.
However for limited, brief, use - As weapons, emergency backup tools - non-metallic knives made from synthetics offer a great deal. The best synthetic material I've found is woven carbon fiber. It offers enough edge holding capacity, combined with durability, to make an ideal deep-cover back-up knife.

A small hide-away blade, designed for aggressive cutting capabilities. Featuring a rubberized kydex sheath. The rubber coating offers improved traction, helping it to stay in position in deep concealment, and masking the noise of anything rubbing the kydex.
Another very small hideout - Featuring a sheath drilled for stitching into clothing in the style of WWII OSS/SOE escape knives.
Labels:
BFE Labs,
Contact Weapons
Thursday, February 5, 2009
BFE Labs - A Profile
BFE Labs is a small research, training and gear shop based in the high desert of New Mexico. We specialize in independent evaluation and development of tools and solutions for austere and hostile environments; Wilderness, urban and tactical.
Our primary developmental focus is on training solutions, tools and edged weapons, and carry and sustainment systems for the needs of the armed citizen as well as armed professional.
In addition to our in-house development, we conduct testing and evaluation of the range of outdoors, tactical, and other professional gear and equipment. Being end-users, living working and playing in a unique environment gives us an ideal opportunity to put various products to the test for the benefit of the consumer, and the attentive manufacturer alike. Our dedication is to making sure the good guys have good gear.
The Environment:
BFE Labs is based in Socorro, New Mexico. Situated in the Rio Grande river valley, and surrounded by diverse terrain of mountains and high desert, Socorro and surrounding area is an ideal environment for development and evaluation of equipment. Within a 45-mile radius are plus-10,000 foot peaks, riparian wetlands, volcanic cliffs, and barren deserts. BFE Labs is not the first to make use of this unique terrain, as Socorro has long been a hotspot of research and training, with proximity to White Sands Missile Range, and being home to the Energetic Materials Research and Testing Center, one of the premier weapons research and first responder training facilities in the nation.
BFE Labs also has exclusive access to a 2,000 acre property situated at 6,500 feet above sea level in the mountainous foothills of North-Western Socorro County. Featuring classic high-desert terrain, the property sits just a few miles North of the National Forest land where the famed USAF ParaRescue conduct “field school” exercises. This property provides us with excellent and varied conditions in which to test gear and practices under a range of circumstances.
The Experience:
BFE Labs brings to the table an array of skillsets, interests and backgrounds.
BFE Labs principal, Morgan Atwood, has been a custom knife and tool maker for nearly 10 years. He has been a Wildland Firefighter and an EMT with experience providing medical support in austere environments in the SouthWestern US. With life long experience living and working in the back-country, Morgan’s familiarity with remote environments and their unique requirements is one of the driving forces behind BFE Labs training, design work, writing and product evaluations. Morgan is a long time student of martial arts and combatives, including edged weapons, WWII combatives, and MMA, as well as a lifelong shooter and firearms skills student. Morgan has also been a student of engineering and general sciences while in pursuit of a degree, and brings this knowledge to the fore in his work.
Other contributing members of the BFE group bring to the table experience in advanced engineering fields, specialized manufacturing for the defense industry, wildland fire fighting, materials science and engineering.
In addition to technical and professional experience, everyone behind BFE Labs has extensive experience in martial arts and sciences, shooting sports and wilderness pursuits, particularly technical sport. The BFE Labs crew conduct regular gym and range sessions in search of answers to problems of physical and armed confrontation. Beyond the training ground, sessions of the BFE Labs crew include such pleasures and pains as hiking and backpacking, rock climbing and mountaineering, abandoned mine exploration and spelunking. Making use of some of the most remote and rugged terrain in the South West, we believe first in testing our bodies and minds – Developing ourselves in challenging and arduous situations – And from there, testing everything else.
We are focused by our experientially driven philosophy - We develop material and designs that support our lifestyles and our professions. We test and review gear and materials by the greater standard of need we have established through hard work and harder play. In adventures and professions where lives are at stake, there is no room for error, and demands must be exacting – Only the best will do.
BFE Labs – Solutions for Austerity and Hostility.
Our primary developmental focus is on training solutions, tools and edged weapons, and carry and sustainment systems for the needs of the armed citizen as well as armed professional.
In addition to our in-house development, we conduct testing and evaluation of the range of outdoors, tactical, and other professional gear and equipment. Being end-users, living working and playing in a unique environment gives us an ideal opportunity to put various products to the test for the benefit of the consumer, and the attentive manufacturer alike. Our dedication is to making sure the good guys have good gear.
The Environment:
BFE Labs is based in Socorro, New Mexico. Situated in the Rio Grande river valley, and surrounded by diverse terrain of mountains and high desert, Socorro and surrounding area is an ideal environment for development and evaluation of equipment. Within a 45-mile radius are plus-10,000 foot peaks, riparian wetlands, volcanic cliffs, and barren deserts. BFE Labs is not the first to make use of this unique terrain, as Socorro has long been a hotspot of research and training, with proximity to White Sands Missile Range, and being home to the Energetic Materials Research and Testing Center, one of the premier weapons research and first responder training facilities in the nation.
BFE Labs also has exclusive access to a 2,000 acre property situated at 6,500 feet above sea level in the mountainous foothills of North-Western Socorro County. Featuring classic high-desert terrain, the property sits just a few miles North of the National Forest land where the famed USAF ParaRescue conduct “field school” exercises. This property provides us with excellent and varied conditions in which to test gear and practices under a range of circumstances.
The Experience:
BFE Labs brings to the table an array of skillsets, interests and backgrounds.
BFE Labs principal, Morgan Atwood, has been a custom knife and tool maker for nearly 10 years. He has been a Wildland Firefighter and an EMT with experience providing medical support in austere environments in the SouthWestern US. With life long experience living and working in the back-country, Morgan’s familiarity with remote environments and their unique requirements is one of the driving forces behind BFE Labs training, design work, writing and product evaluations. Morgan is a long time student of martial arts and combatives, including edged weapons, WWII combatives, and MMA, as well as a lifelong shooter and firearms skills student. Morgan has also been a student of engineering and general sciences while in pursuit of a degree, and brings this knowledge to the fore in his work.
Other contributing members of the BFE group bring to the table experience in advanced engineering fields, specialized manufacturing for the defense industry, wildland fire fighting, materials science and engineering.
In addition to technical and professional experience, everyone behind BFE Labs has extensive experience in martial arts and sciences, shooting sports and wilderness pursuits, particularly technical sport. The BFE Labs crew conduct regular gym and range sessions in search of answers to problems of physical and armed confrontation. Beyond the training ground, sessions of the BFE Labs crew include such pleasures and pains as hiking and backpacking, rock climbing and mountaineering, abandoned mine exploration and spelunking. Making use of some of the most remote and rugged terrain in the South West, we believe first in testing our bodies and minds – Developing ourselves in challenging and arduous situations – And from there, testing everything else.
We are focused by our experientially driven philosophy - We develop material and designs that support our lifestyles and our professions. We test and review gear and materials by the greater standard of need we have established through hard work and harder play. In adventures and professions where lives are at stake, there is no room for error, and demands must be exacting – Only the best will do.
BFE Labs – Solutions for Austerity and Hostility.
Labels:
BFE Labs
Thursday, January 29, 2009
Carrying the Blowout Kit, part 2
Second part, a more in depth look at tools best suited for minimalist carry, in a jacket or jeans pocket, every day.
See below for Introduction and Part One
Labels:
Medical
Carrying the Blow Out Kit: Part One
An examination of carrying the blowout kit (penetrating trauma kit) on a daily basis.
First part, introducing conventional blow out kits and pouches more common to the military environment, and requiring larger cargo capacity to carry.
(See post below for introduction)
Labels:
Medical
Carrying the Blow Out Kit: Introductory Concepts
An extremely brief introduction to the concept of blow-out kits, and tactical medicine in the armed citizen/civilian tactical environment.
Labels:
Medical
Wednesday, January 21, 2009
Personal Preparedness Pack V1
I originally wrote this as a note for close friends and associates several months ago, as an overview of the concept of a civilian day-to-day preparedness pack. Not something with which to survive a massive or long-term situation, but with which to overcome day to day challenges and unexpected, short-term, hostilities.
In the months since I originally sent this out, I have upgraded my personal kit and some of my thoughts on said kit, and will be posting a V2 at some point in the near future once I have taken photos. However, the original concept retains a great deal of validity, and provides an interesting reference point for tracking the evolution if nothing else. With that in mind, I thought I'd post it here.
In the months since I originally sent this out, I have upgraded my personal kit and some of my thoughts on said kit, and will be posting a V2 at some point in the near future once I have taken photos. However, the original concept retains a great deal of validity, and provides an interesting reference point for tracking the evolution if nothing else. With that in mind, I thought I'd post it here.
Labels:
Survival
Subscribe to:
Posts (Atom)











