Thursday, July 30, 2009

"Its The Tribes, Stupid"

I posted this via the oft-ignored BFELabs Twitter feed, and managed to screw up the link, so I'll just put it here and do a proper job of it.

Steven Pressfield, author and historian (author of Gates of Fire, among others), has been, for about two months now, publishing a blog on Tribalism and warfare, specifically in Afghanistan. It began with a five part video series, and has continued as a series of blog writings. It is very good.
Pressfield has also posted about other topics, primarily writing, and he's had good things to say on that front too. Things which a lot of bloggers (even tacti-bloggers) could learn from, including me as the BFE Labs proprietor and mouth-piece in charge.
Pressfield's blog has become one of my favorites, rather rapidly, and in my opinion is one of the best of its kind out there. I encourage you to check it out.

"Its the Tribes, Stupid" - http://blog.stevenpressfield.com/

Monday, July 13, 2009

Compact Gauze - More Solutions Are Needed


Thanks to a friend on Total Protection Interactive, I've got a package of North American Rescue Products S-Rolled Gauze to play with, and its prompted some thoughts on compact gauze solutions.
Gauze is one of the essential tools of trauma management. Roller gauze can be used for a multitude of things, from wound cleaning and dressing, to wound packing for hemorrhage control, and is an essential for every well stocked first aid kit.
The problem in many settings in which space is at premium, is that roller gauze is not small. A package of large/standard (4.5” x 4.1yds) Kendall Kerlix roller-gauze is roughly 5 ½” x 3” x 2”. It can be smashed down smaller inside a pouch or bag, but its still bulky.
The solution to this is vacuum packing for compression of the gauze. H&H Medical, maker of the Cinch-Tight, produces one such solution, PriMed Gauze. NARP's S-Rolled gauze is another such solution.
The PriMed gauze puts a standard large gauze roll into a cube approx. 2 ½” x 3” x ½”.
The S-Rolled gauze puts the same size roll into a package roughly 8" x 4 ½" x 1" (at thickest).
The NARP product has a lot of excess plastic. It can be folded down to a more compact 5" x 3" x 1".
(Note in the photos, the PriMed gauze shown is slightly larger than normal, as its package got a pinhole in it allowing some air entry, and increasing its size fractionally. Its not that far off, however.)

Both of these products do a good job of reducing the space necessary to carry a full roll of gauze, but there are still niches in this area that could be filled.
Neither of these products fit particularly well into small pouches, or pocket sized kits. The PriMed probably achieves the most absolute compaction of the gauze, but the cube like form factor makes an awkward shape in some kits, and can create an uncomfortable lump when placed in a pocket.
The S-Rolled gauze has too much extra plastic in the packaging, and is too inconsistent in thickness/thinness to be any more ideal a solution for these spaces. Were the packing slightly more compact, and the packing more uniformly flat, it would be an almost ideal tool for pocket carry, pre-packed vacuumed kits (ala ResQPak), and other space restricted applications.
The need for some alternate form factors of compact gauze packaging isn't just limited to pocket carry. Not everyone running a dedicated blow-out-kit pouch has the room available for a full size gauze roll, and for many, even these extant solutions are far from ideal. In the law enforcement environment, for example, a common complaint against blow-out kits is that they simply take up too much room on an already crowded duty belt - Solutions that work often make use of absolutely minimalist tools, or heavy vacuum packing of contents. Even then, these heavily vacuum packed gauze solutions may be abandoned for an easier to carry, but less effective, tool such as an abdominal pad, or abandoned all together.
A flat packing, in-obtrusive, gauze package that contained a compressed full 4.5" x 4.1 yds gauze roll would solve many of these problems. It could be as large as the folded-up S-Rolled gauze (5" x 3") provided it was no more (and ideally less) than 1/2" thick. If PriMed can be packed that small and not be any thicker than that, something taller and wider certainly should be able to. And it should be packed consistently, with uniformity in the final packaging.

The need exists. Does a solution? The two obvious contenders are those who've already brought useful compact gauze solutions to the market - H&H and NARP. Their products are excellent, and have a valid place, but can more, better, can be achieved for different needs?

Friday, June 19, 2009

Bad Medicine & Validation

Opinions are like assholes, some say, in that everyone has one. I’d argue that assholes are much more wholesome than opinions in that people only have one, and they tend to keep it at least moderately clean. Opinions are a much more fecund and foul field. Particularly in medicine.
How bad this can get varies somewhat depending on where you are, at what practitioner level, and what the subject is. At the practicing professional level there are still arguments and opinions, but there is a high level of knowledge-maintenance performed on the wide array of common things and everyone is pretty much on the same page.
This is of course limited at times by the given specialties of the practitioner in question, as their knowledge will be focused on their specialty or area of expertise. But, there is a standard of knowledge maintenance. And that knowledge is well founded, based on scientific research and study – It’s not something their buddy repeated after having a beer with a guy who said he used-to-was an 18 Delta.
I say this because as you move into the less professional realms of medicine, particularly those revolving around providing civilians and non-medical personnel with medical skillsets, you start seeing a lot less of the former, and a lot more of the latter. Now, this is probably not the rule, but it is a hyper-prevalent exception.

Tuesday, June 16, 2009

5.11 Chest Rig - Initial Impressions



For awhile now I’ve had interest in playing with some simple chest-rig configurations for somewhat unconventional purposes. Namely, supporting firearms not commonly supported by modern tactical gear, and load-bearing for non-tactical purposes. The easiest solution for adapting to something unconventional is to start with a highly modular platform. The obvious conclusion is a strictly MOLLE chest rig. Also as noted in some previous writing, this type of load bearing equipment arose as a possible solution for mine exploration work as well.
There are a bevy of options for this type of rig out there, almost everyone makes some variant of a plain-MOLLE chest rig. One of the more recent entrants into that field is 5.11
Known for their clothing, 5.11 Tactical has only more recently begun to expand their line into tactical gear proper. Among other things, they offer a small handful of packs and bags, and a growing range of MOLLE compatible pouches and rigs.
These offerings seem to be aimed at providing a low cost alternative, that delivers higher quality than airsoft grade drek without the price of higher end gear. I don’t think anyone is expecting Eagle, Tactical Tailor, Emdom or Paraclete for the prices 5.11 is asking, including 5.11 themselves.
The chest rig from 5.11 is a simple design, using basic features to create a robust platform rather than going for anything too “whiz-bang”. The rig is a simple mesh panel, with PALs webbing across the front, and a mesh pocket its width across the rear. The X-harness attaches to the chest rig via four UTX Flex side-release buckles, two at the top and one on each side. The construction of the rig seems solid enough. I’ve seen more bombproof stitching methods than are used here, but I see no obvious problems with those used. Again, for a $29.99 product, this is a step above what is commonly available for those prices (i.e. airsoft crap). It has certainly, in my initial outings with it, held up better than airsoft-grade crap.
(More after the Jump)

Thursday, June 4, 2009

The SWAT Tourniquet

SWAT Tourniquet, atop US Army IFAK



The essential element of bleed management in the tactical setting is the tourniquet. It is not ideally a stand alone tool, but in many ways it remains the tool. If no other tool is available, a tourniquet can be placed with life saving effect. Even when other tools are available, tourniquet placement on active extremity hemorrhage can mean the difference between a patient surviving to the point of further management and not. Tourniquets are the tool a fighter can apply rapidly and quickly, with a high level of certainty that blood loss will at least be reduced, and return to the fight after doing so.

What It Is:
There are a bevy of “tactical” tourniquets on the modern market. Primarily one hand designs, as necessitated by the realities of self care and the tactical environment, but of all shapes, materials and sizes. Many of them are overly complex, and yet others are absolutely simple.
Of the available options, it probably doesn’t get simpler than the Stretch, Wrap And Tuck Tourniquet (SWAT-T) from TEMS Solutions. The SWAT-T is absolutely minimalist design at its finest and most functional, being a simple band of latex-free rubber approximately 4-feet long, and 4 inches wide. Simple as it is, when properly applied the SWAT-T can deliver complete tourniquation of even larger limbs (muscular legs at the thigh).

SWAT Tourniquet Unfurled

To use the SWAT-T as a tourniquet, it must be wrapped around the limb (proximal placement, standard application for any tourniquet) under tension. Pulling the SWAT-T, stretching the material constantly as it is wrapped, allows it to be wrapped extremely tightly. Once wrapped, to secure it, you simply lift an edge of the material and tuck the running end firmly under. The material, being somewhat self adhering, pulls down against itself as it tries to relax into its unstretched state. This both locks the running end firmly in place, and pulls the tourniquet even tighter on the limb. Application is fast, secure, and effective.

SWAT Tourniquet Self-Applied to Upper Arm

On the SWAT Tourniquet website, www.SwatTourniquet.com, several videos of it being applied are posted. In each video, vascular Doppler is used to measure flow (or, lack of flow as the case is) after application. The flow in both leg and arm applications is completely occluded. This has been duplicated in independent review posted by a moderator on the Professional Soldiers board, and quoted in a Powerpoint issued by SWAT Tourniquet.
In addition to functioning as a tourniquet, the SWAT-T can function as pressure dressing, elastic wrap or in an emergency splinting role. The tourniquet is printed with a series of directions and simple symbols, indicating when it is stretched enough to provide the proper amount of pressure for effective tourniquation. When applying it for other purposes, you simply don’t stretch it as much. The visual indicators on the tourniquet are a very effective guide for applying it correctly.
The developer has reported that those unfamiliar with the SWAT-T, upon being handed it and looking at the instructions, take an average of around twenty seconds to successfully apply it. Given its intuitive simplicity, clear packaging instructions and on-board visual feedback, this should be no surprise.

Tuesday, June 2, 2009

Snake Bite


Growing up in the hinterlands of New Mexico, and continuing to live, work and play in suburban, rural or plumb bum-fuck-Egypt areas, I’ve had my share of run ins with snakes. There have been, of course, the harmless run ins, which I usually encouraged. Namely, the bullsnakes and racers I’d catch as a kid, shutting them up in a terrarium for a week or two before depositing them back where I nabbed them. Then there were the run ins with the less desirable element of the serpent world – Venomous snakes, particularly rattlesnakes.
I have stepped on, kicked, almost sat on, put my hand down on, been crawled over and been struck by both Western Diamondback and Prairie Rattlers. I’ve had close calls of less dramatic nature with most other species of rattler in the southwest, to include Mojave and most recently Timber rattlers.
After this most recent encounter, while hiking to a mountainous mine adit, I was musing on my personal history with rattlers. I mentioned to my companions that eventually my snake luck is going to run plumb out, though I honestly hope not. Having my boots struck but not penetrated is more than close enough for me.
But this encounter and my experiences in the past, led me to doing a mental review of what I know about snake bite medicine. What I came up with was both woefully short, in my estimation, and far better than what I hear being repeated around various communities I’m part of.
Given that, I thought it might be beneficial to put together a little something on venomous snake-bite, and good practices related there-to. Something between an actual article, and a literature review. Both for my own benefit, as I expand what I know, and to build on the obvious gap in whats commonly published.

Sunday, May 31, 2009

Chest Rigs in Abandoned Mines and Other Ideas Explored


This past Saturday, I, along with Ian Wendt of Special Circumstances and two of our friends, went for an extended wander. It was a great single day of hiking and exploring. Eight hours of near-non-stop movement through pretty rough country (7000 - 8000+ feet elevation, with rapid drops and rises between that range), plus some forays into abandoned mines.
We had struck out with the hope of entering a specific mine, but found our way blocked, and rather than give up we went for a wander. Looking, of course, for other dark holes to poke around in. We found a few, mostly short and un-interesting. The last one however provided a few hours of good exploration and some opportunity to test some things out.

The folks from 5.11 were kind enough to send me one of their MOLLE compatible chest rigs to T&E. I don’t think they had abandoned mine exploration in mind when they provided the sample, but this was my first opportunity to seriously use the rig after receiving it. }
Our little crew of intrepid idiots… erhm, adventurers, has been talking about changing up our load-bearing methods for working in the mines and using chest-rigs or load-bearing vests has come up as a very workable idea. This was the first time any of us has tested it however.